Clanker is a token deployment protocol on Base and other EVM chains. To launch a token, open clanker.world, click Create, connect a wallet, enter a name, symbol and image, set a buy and sell tax between 1% and 10%, and deploy. Clanker charges no launch fee, so you pay only gas. Every new token has a fixed supply of 1 billion, and its launch liquidity is locked for good.
Since October 31, 2026, every new launch uses Clanker v5, which works differently from the v4 version shown in older guides and in our video. This guide follows the v5 form, explains the fees, and answers the common question of how Clanker locks liquidity in v4 and v5. For a video walkthrough of the earlier flow, watch:
Clanker at a Glance
Setting | What Clanker v5 does |
|---|---|
Where | clanker.world, by tagging @clanker on Farcaster or @clanker_world on X, or through the API and SDK |
Chains | Base, BNB Chain, Monad, Robinhood Chain, X Layer, Arc and Elysium. Ethereum, Arbitrum, Unichain, Abstract and Solana are no longer supported. |
Cost to launch | No launch fee on the website, only gas. For bot launches, Clanker pays the gas. |
Total supply | 1,000,000,000 tokens, fixed. Tokens launched on v3 and v4 have 100 billion. |
Fee model | A buy tax and a sell tax, each from 1% to 10%, set at launch and frozen afterwards. The default is 1%. |
Clanker's share | The larger of 10% of the tax or 0.5% of the trade, capped at 1% of the trade. The rest is the creator share. |
Sniper tax | On by default. For the first 20 seconds the fee starts at 99% and falls to the normal tax. All of it goes to Clanker. |
Liquidity | One Uniswap v4 pool holding the whole supply. The hook blocks every liquidity add and removal, so it can never be removed. |
Figures are from the Clanker documentation and the live deploy page, checked on November 15, 2026.
What You Need Before You Start
- A wallet on the chain you want to launch on, with a little of that chain's gas token. On Base that is ETH.
- A token image (JPEG or PNG, up to 1 MB), a name and a symbol.
- A decision on the tax. It cannot be changed after launch.
How to Launch a Token on Clanker
The screenshots below show the earlier v4 form, so the layout on the live site is different. The steps use the current v5 labels.
Step 1: Open clanker.world and click Create
Go to clanker.world and click Create in the header.
Go to clanker.world and click Create in the header. This opens the deploy page, titled Create a Clanker.


Step 2: Connect your wallet
Connect a wallet on the chain you are launching on.
Connect your wallet and make sure it is on the right network. Until a wallet is connected, the button at the bottom of the form reads Connect to Deploy.

Step 3: Enter the network, name, symbol and image
Fill in the basic token info and the optional description and links.
Choose the Network (Base is the default), then enter the token Name and Symbol and upload the image. Under Description & Social you can add a description and links to Telegram, a website, X and Farcaster. These are optional.

Step 4: Set the tax and the token settings
Choose the buy and sell tax, where the creator share goes, and the other options under Token Settings.
Under Token Settings:
- Tax. Set the buy tax and the sell tax, each between 1% and 10%. The rate includes Clanker's share.
- Tax allocation. By default the whole creator share goes to you as creator funds. You can send part of it to holder dividends or to a burn instead.
- Sniper tax. On by default. It makes buying in the first 20 seconds very expensive, which discourages bots. Your own creator buy does not pay it.
- Editable metadata. On by default, which lets you change the image and description after launch. If you turn it off, the token cannot be verified.
- Rewards. By default 100% goes to the connected wallet. You can add other reward recipients and give each a percentage.
- Pair. USDC by default on Base, and the chain's native coin on other chains.
The summary panel shows the starting market cap that the factory sets. On November 15, 2026 it showed 4,009 USDC for a USDC pair on Base. Clanker can change that starting price for new launches, so check the panel on the day.
Step 5: Add a creator buy if you want one, then deploy
Optionally enter an ETH amount for a first buy, then deploy and confirm in your wallet.
Under Add-ons, Creator buy lets you spend ETH to make the first purchase in the launch transaction. It is optional. Then deploy and confirm the transaction in your wallet.

When the transaction confirms, the token has its own page on clanker.world and is tradable straight away.
Launching by Tagging the Clanker Bot
You can also launch without the website by tagging @clanker on Farcaster or @clanker_world on X, for example: "@clanker_world launch a token called myNewToken with the ticker MINE". Clanker pays the gas.
- The token is a v5 token on Base with a 1% buy and sell tax unless you ask for another rate or chain in the post.
- A bot launch has no creator buy.
- Each account gets 5 launches per day, and the account must be at least 24 hours old with at least 10 followers.
The bot never needs a seed phrase or private key. Do not send one to any account.
How Creator Rewards Work
The tax on each trade is split between Clanker and the creator share. At a 1% tax, Clanker keeps 0.5% and the creator share is 0.5%. At 5%, the split is 0.5% and 4.5%. At 10%, it is 1% and 9%. Rewards are paid in the pair token, so USDC for a USDC pair.
To claim, open your token's admin page at clanker.world/clanker/ followed by the token address and /admin, connect the reward recipient's wallet, and use the Claim Rewards card.
A high tax means every buyer and seller loses that share on each trade, on top of slippage. Traders check the tax before they buy.
How Clanker Locks Liquidity
This depends on the version the token was launched with.
- v5 (all launches since October 31, 2026). There is no locker contract. In the words of Clanker's documentation, "the hook places the launch liquidity itself and blocks every liquidity add and removal, so the liquidity can never be removed." The contracts are not upgradeable and the hook has no owner.
- v4 and v4.1. The launch liquidity is held by a locker contract (ClankerLpLocker or ClankerLpLockerFeeConversion) that mints the Uniswap v4 positions and keeps them. The locker can collect fees but has no function to withdraw a position, and it is not upgradeable. The lock is custody by that contract, not a hook.
- The v4 hooks. ClankerHookStaticFee, ClankerHookDynamicFee and their V2 versions (ClankerHookStaticFeeV2, ClankerHookDynamicFeeV2) set fees and run launch sniper protection. In the published source code their beforeRemoveLiquidity permission is set to false. The only liquidity callback they use is beforeAddLiquidity, which blocks adds while the MEV module runs, for up to 2 minutes after launch.
- v3. The Uniswap v3 LP position goes to a locker with no withdraw function.
The v4 source is public in the clanker-devco/v4-contracts repository. Locked launch liquidity means the creator cannot pull the pool, which removes one kind of rug pull. It does not stop the price from falling when holders sell.
Frequently Asked Questions
What is Clanker?
Clanker is a protocol for deploying tokens on Base and other EVM chains. It started as a Farcaster bot: you tagged @clanker in a post and it deployed a token. It now also works from clanker.world, from X, and through an API.
How much does it cost to launch a token on Clanker?
The v5 launch fee is zero, so on the website you pay only gas. When you launch by tagging the bot, Clanker pays the gas.
What chains does Clanker support?
Base, BNB Chain, Monad, Robinhood Chain, X Layer, Arc and Elysium. It no longer supports Ethereum, Arbitrum One, Unichain, Abstract or Solana.
Can a Clanker creator remove the liquidity?
No. In v5 the hook blocks every liquidity add and removal. In v3 and v4 the launch liquidity sits in a locker contract that has no withdraw function.
Does Clanker use a beforeRemoveLiquidity hook?
Not in v4. The v4 and v4.1 hooks have beforeRemoveLiquidity turned off, and the lock comes from the locker contract holding the position. For v5, the documentation says the hook blocks liquidity removal but does not name the callback.
What is ClankerHookStaticFeeV2?
It is the v4.1 static fee hook. It works like ClankerHookStaticFee but is built on ClankerHookV2, which lowers the maximum fee a creator can set from 30% to 10%.
What is the total supply of a Clanker token?
1 billion for v5 tokens. Tokens launched on v3 and v4 have 100 billion.
Related Guides
- How to launch a memecoin on Base using Rainbow Wallet
- How to launch creator coins on Zora
- How to launch a memecoin on Four.meme
- How to launch a memecoin on Pump.fun
- Market cap vs liquidity
This guide is for education and is not financial advice. Launching or buying a token can lose you the full amount you put in.




